Drill 5/8- to 2-1/2-inch holes 18 inches deep in a 4-foot patch with the only on-grade drill on the market with these capabilities – the 210B. It requires just 100 cfm to operate, and the dual-purpose guide wheels transition simply from on-grade positioning to easy transportation around the jobsite. With its adjustable drill height you can drill into the center of slabs that are 6 to 24 inches thick.

Horizontal Position

• Lower Length (A): 51 3/8 in (130.5 cm)
• Lower Length w/ Back Wheel Removed: 46 in (116.8 cm)
• Width (B): 12 in (30.5 cm)
• Height (C): 30 in (76.2 cm)
• Weight: 285 lbs (129.4 kg)
• Drill Distance From Corner: 6 in (15.2 cm)
• Drill Distance From Ground: 3 in (7.6 cm)
• Drill Depth (std.): 18 in (45.7 cm)
• Drill Bit Diameter: 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
• Drill Motor (pneumatic): CP 32A
• Drill Motor Weight: 54 lbs (24.5 kg)
• Chuck Size (std.): 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
• Air Consumption (minimum): 100 cfm (2.8 m^3/min)
• Operating Pressure: 90 psi (6.2 bar)
• Impact (ft lbs/blow): 36 fpb (49 J)
• Hammer Speed: 2200 bpm
• Speed: 288 rpm

Vertical Position

• Lower Length (A): N/A
• Lower Length (C): N/A
• Overall (A): N/A
• Width: N/A
• Height (B): N/A
• Weight: 335 lbs (152 kg)
• Drill Distance From Corner: N/A
• Drill Distance From Ground: Up to 12 in (30.5 cm)
• Drill Depth (std.): 18 in (45.7 cm)
• Drill Bit Diameter: 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm)
• Drill Motor (pneumatic): CP 32A
• Drill Motor Weight: 54 lbs (24.5 kg)
• Chuck Size (std.): 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm)
• Air Consumption (minimum): 200 cfm (5.6 m^3/min)
• Operating Pressure: 90 psi (6.2 bar)
• Impact (ft. lbs./blow): 36 fpb (49 J)
• Hammer Speed: 2200 bpm
• Speed: 288 rpm